OTORAM 30 early model T20 single LED turn signal bulb with prevention vehicle inspection with cooling amber T20 single 7440 W21W LED turn signal

―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― 🛫【Certified Store on JOOM】 A Japanese seller delivering high-quality products across borders! 📦【Shipped from Japan】 We pack carefully and deliver promptly and securely. 🔍【Strict Inspection Based on Japanese Quality Standards】 Only carefully selected products of excellent quality are delivered. 📒【Japanese Instruction Manual May Be Included】 We recommend using a text recognition app for translation. 👍【If you are satisfied with the product, please "Follow" our store and leave a review!】 Your support means a lot to us 💖 ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― ▶OTORAM compatible/replaceable front/rear LED turn signals for the "30 Alphard/Vellfire early model": 36 high-performance 2020 LED chips for turn signals are installed on the entire bulb, providing sufficient illumination in 360 degrees. The brightness allows the rear of the vehicle to be illuminated farther and wider, greatly improving safety. Brightness and diffusion that can be seen sufficiently in daytime environments, brighter than halogen bulbs but energy-saving, brightness has been significantly increased by about 4 times. Improves visibility at night and ensures safe driving. ▶Built-in dedicated high-flashing prevention resistor, easy installation: When replacing conventional LED turn signals from halogen bulbs to LEDs, the high-flashing phenomenon occurs, where the turn signals flash rapidly due to the difference in power consumption. In such cases, it was necessary to process the wiring and install a resistor separately, but this product has a high-flashing prevention function built into the bulb itself. Installation is completed by simply replacing the bulb, without the need for resistor installation or troublesome wiring processing, and without specialized knowledge. ★ Solves the problem of dashboard errors ★ Solves the problem of steering strobes. ▶Excellent heat dissipation and durability: Aviation aluminum alloy material + high-speed rotating cooling fan is used to efficiently dissipate heat and achieve excellent heat resistance and heat dissipation that can withstand high temperatures for a long time. In addition, by preventing the main body from becoming too hot, the LED performance can be fully secured, stable light emission can be achieved, and the product life has been successfully extended. ▶Constant current driver with built-in overheat protection IC: Built-in smart chip designed specifically for Japanese cars. ●Constant current drive & overheat protection design that drives LEDs with a constant current ●Equipped with overheat protection IC Protects the LED with a circuit that reduces the current when a certain temperature is reached ▶ Compatible models: OTORAM compatible/replaceable ★30 Alphard early model (H27.1-H29.12: AYH, GGH, AGH3# series) front and rear ★30 Vellfire early model (H27.1-H29.12: AYH, GGH, AGH3# series) front and rear [Compatible models] OTORAM compatible/replaceable ▶30 Alphard early model (H27.1-H29.12: AYH, GGH, AGH3# series) front and rear ▶30 Vellfire Early Model (H27.1-H29.12:AYH,GGH,AGH3# series) Front/Rear [Product Specifications] ▶Light color: 3000k amber ▶ Compatible voltage: DC10-30V ▶Power consumption: 24W/piece ▶Polarity: non-polar ▶LED Chip: 2020 SMD ▶Protection grade: IP65 ▶ Lumens: 2000Lm/pc ▶Warranty period: 1 year warranty [Front/rear LED turn signals exclusively for the "30 Alphard/Vellfire early model"] Equipped with 36 high-performance 2020 LED chips designed specifically for turn signals, the bulb is fitted across the entire surface, providing sufficient illumination in 360 degrees. The light is bright enough to illuminate the rear of the vehicle farther and wider, greatly improving safety. The light is bright enough to be seen in daytime environments, and the light is diffused. Brighter than halogen bulbs, yet energy efficient, the brightness is increased by approximately four times. Improves nighttime visibility and ensures safe driving. [Built-in special anti-hyperflash resistor, easy installation] When replacing conventional LED turn signals from halogen bulbs to LEDs, the difference in power consumption can cause the turn signals to flash rapidly, resulting in a hyper-flashing phenomenon. In that case, it would have been necessary to modify the wiring and install a separate resistor, but this product has a hyper-flash prevention function built into the valve itself. There is no need to install a resistor or perform any complicated wiring work, and installation can be completed by simply replacing the bulb, which does not require any specialized knowledge. ★Fix the dashboard error issue. ★Solve the steering strobe problem. [Constant current driver with built-in overheat protection IC] Equipped with a smart chip designed specifically for Japanese vehicles. ●Constant current drive and overheat protection design that drives the LED with a constant current. ● Equipped with an overheat protection IC The LED is protected by a circuit that reduces the current when a certain temperature is reached. [Excellent heat dissipation effect and durability] Aviation aluminum alloy material + high-speed rotating cooling fan is used to efficiently dissipate heat, Achieves excellent heat resistance and heat dissipation, allowing it to withstand high temperatures for long periods of time. In addition, by preventing the body from becoming too hot, We have succeeded in ensuring sufficient LED performance, achieving stable light emission, and extending the product lifespan. [Installation precautions] ◆Installation and operation please carry out at your own risk. ◆ When replacing, check the ratings, nozzle shape and valve dimensions. ◆ LED bulbs become hot when lit. Please turn off the light and allow the bulb to cool completely before working on it. ◆ Avoid moisture and oil, and do not handle with dirty hands or gloves, as this may cause damage or shorten the product's lifespan. ◆ Do not look directly at the LED light, as it may cause impaired eyesight. ◆ When the light is on or immediately after it is turned off, the light bulb or LED bulb will be hot, so do not touch them with your hands or other parts of your body. This may cause burns.