Specification:
Brand new
Material: Plastic, Metal
Handle color:Red & Black Random
Highest temperature: 1300 ℃
Nozzle diameter(approx.): 35 mm
Connector Diameter(approx.): 10mm
Flame gun length(approx.): 48 cm
Tracheal length(approx.): 145 cm
When used correctly,it can produce the high temperature of 1300 ℃, is an ideal tool for welding, bake, heating, such as:Welding metal, machine parts heat treatment, casting industry, leak buildingrepairing, wooden boat repair, meat processing (unhairing),communications cable maintenance, pipeline maintenance, old paint
baking, plastic melt, jewelry processing, wood products baking, granite surface smooth processing, car start heating in winter, etc.
Usage Method:
Step 1.Check: Connect all flame gun parts, screw the gas pipe clamp, or with
wire connected liquefied gas bottle interface, close the flame gun
switch, loosen the liquefied gas cylinder valve, inspect all parts if
air leakage.
Step 2.Ignition: Slightly loosen the gun switch, can be
ignition directly in the nozzle, adjust the flame gun switch to the
required temperature.
Step 3.Shut down: First close liquefied
petroleum gas cylinder valve, after being shut down, then close the
switch, shall not left the residual gas in the tube, hangs the flame gun
and gas pipe in a dry place
Package Included:
1 x Flame gun
1 x Tube
Note:
This product is strictly forbidden to touch oil
Found burns, aging, wear of the gas pipe, should be replaced in a timely manner
When using,you should leave the gas bottles of 2 meters
Often check each parts, keep the seal
Do not use inferior gas, if discover the stomatal congestion, loosen
the nut in front of the switch, or the nut between the nozzle and airway
nut.
Keep children away.
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
