Model number: Makita 18v BL1860B Voltage: 18v Capacity: 6000mAh (6.0Ah) 108watts Type: Lithium-ion battery (Li-ion).
Replaceable: Compatible with Makita 18V BL1815 BL1830 BL1840 BL1850 BL1860 BL1890 194205-3 194230-4 LXT400, quick charger DC18RC, DC18RA, DC18RF, etc.
Equipped with high-quality cells: Built-in protection circuits such as overcurrent protection function, overcharge prevention function, and overdischarge prevention function, so it can be used for a long time.
Widely used: Makita 18v BL1860B Compatible models: BL1860B, BL1850, BL1840, BL1830, BL1830B, BL1820B, BL1815, BL1815N, etc. This BL1860 compatible has a super high capacity of 6.0Ah, so you don't need to charge it frequently.
If you have any problems with the product, please contact our store immediately. 1 year warranty for peace of mind. We will do our best to provide good products to our customers.
[Product specifications] Product name: Makita 18v compatible Rechargeable battery type: Lithium ion battery (Li-ion) Voltage: 18V Capacity: 6000mAh / 6ah Function: Overcurrent protection, overcharge prevention, overdischarge prevention Makita Battery 18v tool If you feel that the power is getting weaker, stop using it and charge it again.Do not charge it again after it is fully charged. Please charge the battery at a temperature between 10℃ and 40℃.If the battery is hot after use, we recommend that you plug it into the charger to cool it down and charge it for a long period of time (6 months or more). When not in use, we recommend charging and storing it. High functionality and high quality: Low self-discharge allows you to work with a near full charge even after long-term storage. In the event of high temperature, over-discharge, or overload, it will automatically cut off the electricity to protect you.We can do this because we are confident in our quality.Equipped with a protection circuit *Over-current protection function *Over-charge prevention function *Over-discharge prevention Features Protection circuit protects internal cells from damage. Focus on quality control! High performance: Large capacity and powerful output. Durability: Manufactured by a major manufacturer.
The battery is durable and durable. To remove the battery, press the button on the side and pull it out. Plug the quick charger into a 100V power source. The charging indicator light will return blinking green. Insert it into the quick charger. When inserting, pay attention to the + and - sides and insert the charger along the charger's insertion guide until it hits the bottom of the charger. When you insert the battery, the charging indicator light will turn red and charging will begin. When charging is complete, the charging indicator light will turn green and the electronic buzzer will beep for about 5 seconds. If you leave it plugged in, it will trickle charge for 24 hours. Warning: Do not charge with anything other than the dedicated charger. If you use a charger for another battery, there is a risk of fire, heat generation, explosion, or fluid leakage. Do not allow the terminals of the product to come into contact with metal, etc. Be sure to attach the battery cover to the battery after disconnecting it from the product or charger. Please do not use anything other than Makita-specific products. In addition, it was modified (disassembled and built-in cells etc.)
(including batteries whose parts have been replaced). Do not pierce the product with nails, subject it to impact, or disassemble or modify it. There is a risk of heat generation, fire, or explosion. If you charge the battery continuously, the charging time may take longer. Do not charge, use, or store the product in high-temperature locations such as near fire or under the scorching sun. Do not store the product in a place where the ambient temperature may rise above 50°C (such as in a metal box or inside a car in summer). This may cause deterioration, resulting in smoke or fire. "
