DRAW A LINE
This is a collaborative brand between Heian Shindo Kogyo, the leading manufacturer of tension rods, and the creative unit TENT.
Until now, tension rods have tended to be treated simply as "ideal goods," but DRAW A LINE redefines tension rods as "single lines" that enrich our lives, proposing a new lifestyle starting from there.
Specifications
For use with Tension Rod (vertical installation) only
Product Dimensions: 11cm W x 18cm D x 16cm H (Shade Size: 8cm dia. x 16cm dia.)
Power Cord Length: Approximately 3m (from socket to power plug)
Power Supply: AC 100V 50/60Hz
Base: E26
Bulb Requires: LED bulb, standard bulb shape, 8W or less (equivalent to 60W or less), length 115mm or less, diameter 60mm or less (customer must provide own bulb)
Power Consumption: 8W (power consumption of LED bulb used)
Switch: Rocker switch (on/off)
Set Contents: 1 unit, 3 cord straps, 4 screws, 1 stapler, instruction manual
Product Weight: 0.6 kg (including cord)
For indoor use only
Check Before Installation
When assembling this product, please carefully read the instruction manual included with the Tension Rod to ensure correct installation.
Incorrect or incomplete installation can cause the light to fall or tip over, resulting in injury, damage to the fixture or bulb, and damage to the surrounding area, making it extremely dangerous.
To prevent the light from tipping over, be sure to secure the EVA pad on the ceiling side of the Tension Rod to the ceiling with a stapler (if the ceiling is made of plasterboard) or screws (if the ceiling is made of plywood).
The light cannot be installed on ceilings made of anything other than plasterboard or plywood.
Installation of the light should be carried out by at least two people.
When installing using Tension Rod C, be careful not to let the insertion points on the upper and middle posts come loose.
After installation, install the LED bulb. Also, leave the power plug unplugged until installation is complete. (The customer must provide the bulb.)
Use the included cord strap to prevent slack in the power cord.
Take care not to trip over the power cord when it is on the floor.
Catching a hand or foot in the power cord or pulling it too hard may cause the device to fall or tip over, resulting in injury, damage to the fixture or bulb, and damage to the surrounding area, which is extremely dangerous.
Do not install the device near a crib or playpen, or in a location where the power cord may become wrapped around a child's body. Wrapping the power cord around a child's neck is a very dangerous choking hazard.
Products taken outside of Japan are not covered by warranty.
We are not responsible for malfunctions or damage caused by acts of God, such as natural disasters, or improper use or modification.
Product Dimensions: Width 11cm, Depth 18cm, Height 16cm
Brand Overview: DRAW A LINE redefines tension rods, which have often been treated simply as "convenient gadgets," as "a single line" that enriches life, and proposes a new lifestyle starting from there. This product allows you to attach various parts, such as shelves, desks, and lighting, to the extremely simple structure of a "single line."
This lamp is designed for vertical installation and can be used in conjunction with the DRAW A LINE Tension Rod series. It attaches to the tension rod, allowing you to install lighting anywhere and in a space-saving manner.
This spotlight provides pinpoint illumination. You can freely adjust the height and angle to direct light to your ideal spot. It can also be used as indirect lighting.
Switch: Rocker switch (handheld on/off switch) Base: E26 Bulb required: LED bulb, standard bulb shape, 8W or less (equivalent to 60W or less), length within 115mm, diameter within 60mm. *Bulb must be provided by the customer.
