Coolbe: The information about the product is provided by the seller. Notwithstanding any of this information, the product is not intended for diagnosis, cure, mitigation, treatment or prevention of any disease, is not a drug or a medical device, and should not be used for any medical purposes. Please consult a medical specialist.
-----
🎄TFT display:
Four color TFT display, more display modes .
Advanced dual TFT color display technology can help users get brighter and clearer information from the pulse oximeter. In addition, the user can see the pulse rate bar graph and the plethysmograph in this TFT display. Four-way display, convenient for users to view test results in any direction.
🎄Fingertip Pulse Oximeter Features:
1. The product adopts double color TFT display and can show the six different dispiay modes.
2. Low-power consumption, continuously work for more than six hours with 2 pieces AAA batieries
3. A Battery Iife indicator
4. The product would Automatically power off in 8 seconds when there is no signal
5. Small,light in weight, and convenient to carry.
6. Accurate and reliable:
Fingertip pulse oximeter can accurately determine your SpO2 (blood oxygen saturation level) and PR (pulse rate) after clinical and professional tests, rapid SpO2 readings, and pulse measurement, and display them conveniently on the large digital bright TFT On the display.
7. Alarm and pulse frequency sound:
When your pulse is detected, the pulse oximeter will make a sound to indicate the pulse rate. If the pulse oximeter detects that your pulse rate and SpO2 are in an irregular state, the pulse oximeter will sound an alarm to remind the user to pay attention to the physical condition. In addition, you can set your own restrictions and whether to enable the alarm sound effect.
🔅Keys function description: in standby mode, start the key instrument into the working state,Touch this button unde the working state can change the display mode.
🔅Note:The machine profle picture is only for reference use, specifcity in kind prevails.
🎄Product Functions:
1. Display Type:TFT display
2. Parameters Display:SPO2, Pulse Rate, PI and Battery Iife indicator
3. SPO2: Measurement range: 70%~99%
Accuracy: ±2% on the stage of 80%~99%
±3% on the stage of 70%~79%
Below 70% no requirement
Resolution: ±1%
4. PR: Measurement range: 30BPM~240BPM
Accuracy: ±1BPM or ±1%(the larger one)
5. Power: two AAA 1.5V alkaline batteries
6. Power consumption: below 30mA
7. Net Weight: about 40g
🎄Operation Instructions
1. install a pair of AAA batteries into the battery compartment.
2. Plug a finger into a rubber hole of the Oximeter.
3. Press button on the front panel to start.
4. Do not shake your finger or move your body when the Oximeter is working
5. Press the button if you want to change display direction.
6. Read the relevant value from the display screen.
7. The device will automatically power off in 8 seconds if there is no finger signal.
🔅Note:When plugging your finger into the Oximeter, your nail surface must be upward.
🔅Declaration: Please use the medical alcohol to clean the rubber before each test and clean the tested finger with alcohol before and after the test. (The rubber inside of the Oximeter is a medical rubber which has no toxin, causes no harm, and brings no side effect such as allergy to the skin).
🎄Hang Rope Installation
1. Put the rope thin end through the hole.
2. Put the rope coarser end through its already wearing thin end part and tighten.
🎄Packing List:
1X Finger Pulse Oximeter(not contained the batteries)
1X user manual
1X lanyard
1X Packing Box
