Feature:
1. Built-in lithium battery, solar and USB dual-mode charging.
2. Rainproof, sun-proof, drop-proof, low-consumption and energy-saving, long standby time of 60 days.
3. Silent pure copper motor, quiet and environmentally friendly.
4. Double pump water supply, can be switched to single pump, can adjust the output water size to meet the needs of different flowers.
5. Food silicone irrigation 4/7 water pipe, anti-aging, temperature-resistant, odorless, sun-proof and corrosion-resistant.
6. With hour mode: watering time 0-9999s, cycle time 1-999h.
In the day mode: watering time 0-9999s, three groups of watering time can be set arbitrarily every day.
Parameters:
1. Name: Solar double pump automatic watering system
2. Charging modes: Solar/USB
3. Motor power: 5W
4. Battery capacity: 2000mAh
5. Input voltage: 4.2V-6V
6. Interface type: micro usb
7. Single Pump flow: 900ml / min
8. Waterproof rating: rainproof
Purchase includes:
Kit 1:
Solar Watering Device*1
USB charging line *1
Instruction Manual *1
Kit 2:
Solar Watering Device*1
Solar panels *1
USB charging line *1
Instruction Manual *1
Kit 3:
Solar Watering Device*1
Solar panels *1
USB charging line *1
Instruction Manual *1
Water filter head *2
Water pipe *10m
Arrow dripping*15
T connector *15
Kit 4:
Solar Watering Device*1
Solar panels *1
USB charging line *1
Instruction Manual *1
Water filter head *2
Water pipe *15m
Arrow dripping*20
T connector *20
Precautions:
1.When using the solar watering device for the first time, please use the USB charging cable to charge the watering device for 8 hours to ensure that the watering device battery is fully charged（Device cannot start if battery is low ）. The subsequent use of the watering device can continuously supply power to the watering device battery using solar panels.
2.If the solar watering device is not used for a long time, fully charge and discharge the solar watering device once every 3 months and recharge it to 70% power to prevent battery damage.
3.please do not spray or soak.
4.The main body should be placed above the water level.
5.The head must be kept clean.
6.The main body inlet must be blocked when not in use to prevent dust from entering the pump and causing damage.
7.When the water source is higher than the dripper, it will cause the siphon phenomenon of dripping water. You can adjust the water source or the dripper position, or let one of the drip heads be higher than the water source.
