Description:
- AC85-250V 2 Channel remote switch uses 10A relay that can load high power appliances.
- High confidentiality, stable performance, low power consumption.
- Learning mode microcontroller decoding, multiple remote controls can be learned.
- Used in garage door control, lighting control, remote control curtain, door control system, all kinds of motor control system.
Specification:
- Channel: 2 CH
- Radio Frequency: 433MHZ
- Operating Voltage: AC85-250V
- Standby current: 10mA
- Maximum load: 1000W
- Material: FR-4 lead free pcb board
- Receiver Size: Approx. 93×54×40mm/3.5 x 2.1 x 1.6inch
- Operating Type: self-lock, jog, interlock
- Learning and clearing Method:
- Learning: Press learning button, and the indicator is off (indicating that you have entered the learning state). Release the learning button and press any key on the remote control, after the indicator light flashes four times and it is always on, which show success in learning.
- Cleaning: Pressing learning button about 8 seconds, the indicator light is switched on from off to back on.
Package Includes:
3 Piece Remote Control Switch
1 Piece Receiver Module
Note:
1.This controller can learn 16 different coding remote controls such as fixed code/learning code etc. If exceed, it will remove the first learning remote control in turn.
2.Due to the quality differentiation of monitors and lighting effect, the picture may not reflect 100% the actual color of the item
3.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
