Professional Electric Sheep Clipper with Speed Control, Red

The Chronus electric shearer is designed for shearing sheep, horses, Cattle and other livestock. The improved cooling system allows you to cut 3-4 sheep per hour or approximately 30 sheep per day. Features: 1. The detachable knife holder is made of high-quality stainless steel. Features comfortable noise levels and reduced vibration. Powered by 220 Network 2. Cable length is 5 meters. The machine is equipped with a rotary motor that provides low levels of vibration with rapid speed increases and frequencies up to 2800 per minute. 3. Use the scroll wheel on the body to adjust the speed from 1 to 6 Speed, choosing the best mode based on the quality of the wool. To get a good cut and extend the life of your clipper, apply a thin layer of oil to the blade and comb between haircuts, including cutting. All other parts also need to be lubricated 4. Moving parts of the cutting head. An average of 70-100 is enough for a set of knives, and there are blade pressure adjustment screws for haircuts to achieve optimal results. Slicing results. The machine is equipped with a removable tool holder made of 5. Forged from high quality stainless steel, easy to produce self-cleaning and replacement knives. Clean the body of the clipper and let it dry with a cloth. Clean the scissors and cutting head with the supplied brush 6. Delivery content. Standard European and Chinese toolholders are available from both manufacturers. It is worth noting that knives can also be sharpened, but special equipment and skills are required for this.

When replacing or installing new or sharp shears, pay attention to the correct positioning of the cutters relative to each other. Install new comb boards. At the same time, place it on the sharp surface of the comb board about 1.5 - 2 mm Protrudes beyond the tip of the upper knife. Screw the bolts onto the comb plate. The air filter effectively prevents hair and dust from entering the interior equipment. The filter can be easily removed for cleaning. Remove the air filter trimmer. Clean the air filter with a dry brush or brush. Please make sure no foreign matter enters the machine when cleaning. object or substance. Reinstall the air filter onto the clipper. This set does not include a convenient case for storing and transporting the set! The kit includes the machine as well as the accessories required for the machine (screwdriver, oil, etc.). Specification: Motor type: Rotary Speed adjustment: 6 levels. Speed: 2800 rpm. Power: 1200 watts Noise level: 85 decibels Tool and tool holder lubrication frequency: once every 15 minutes Knife width: 80 mm Minimum cutting length - 3 mm Power supply network: 220V Cable length: 5 meters Operating temperature range: 0 to +40 °C Product dimensions: 345 x 75 x 75 mm Product weight: 1950 grams