Clscea G211 DIY Co2 Generator for Aquatic Plants Co2 Addition Chemical Formula Co2 Co2 Set Ranking Aquarium Carbon Dioxide Petobon with Diffuser

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- [Clscea pressure increasing goods]: There is no need to frequently massage the bottle. If you dump citric acid into the "goods" and shake it to dissolve, it will reach the green pressure range in just 15 minutes. [With CO2 diffuser]: 4in1CO2 diffuser, built-in anti-reflux valve, and counter function. [Improved cap] Improved airtightness to avoid leakage. A one-touch cap is more convenient. [Complete accessories]: About the on-off valve During daily use, once you adjust the constant flow rate with the speed controller for the first time, you can open the on-off valve every day. Do not use the speed controller frequently. Speed controller (improved version): Metal material. It improves accuracy and durability, and the speed controller allows easy adjustment of 1 drop for 4 to 5 seconds. Comes with 1.6m pressure-resistant CO2 tube and Japanese instruction manual. [Tips for stabilizing pressure] Keep the ball at the end of the citric acid water tube less than 1cm above the water surface. If the pressure suddenly increases, the tip ball can be raised above the water surface. Once the pressure has decreased to the green range, you can move the tip ball 1cm below the water surface and continue using it. [Note] Compatible with commercially available carbonated drink bottles. Products are not randomly sampled. We are conducting a complete inspection. We place great emphasis on quality control and customer feelings. If you have any questions, please feel free to contact us. DIY CO2 generation kit. *This CO2 (carbon dioxide) generator can continuously generate CO2 using the acid-base reaction between citric acid and baking soda and the differential pressure of the kip device. The speed is adjusted using a speed controller, and the aquatic plants perform photosynthetic reactions using the gas emitted from the diffuser. It has high cost performance and is suitable for small and medium sized aquariums. It is highly safe and allows you to enjoy DIY. 【structure】 This device uses the principle of differential pressure. When the citric acid in the test tube chemically reacts with the baking soda and water in bottle B, the pressure created enters bottle A through the bifurcation in bottle B until the pressures in the two bottles are equal. As CO2 escapes from the speed controller, the pressure in bottle B decreases. At this time, the tip of the tube connected to high-pressure bottle A is in citric acid water, so the citric acid solution, rather than air, enters bottle B with pressure and chemically reacts with the baking soda again. This repetition continues automatically until the material runs out. 【function】 This device generates continuous CO2 based on pressure difference theory. The device uses the differential pressure principle to continuously generate CO2. The waste liquid that accumulates in the B bottle during the latter stages of use makes the reaction between citric acid and baking soda incomplete, causing the acrylic acid phenomenon. It is effective to use a citric acid water ball because the pressure will drop and rise and become unstable. [Raw material exchange] After a period of time, the pressure will gradually drop and no CO2 will come out of the diffuser. In this case, all liquid in the bottle should be discarded and replaced with new material. (*Note: Do not open the cap when there is residual pressure. Reduce the pressure before replacing it.) How to reduce pressure: Close the speed controller and remove the air tube → Move the citric acid water ball above the liquid level → Open the speed controller.