Makita Impact Driver 40VmaxTD001 Blue Torque 220Nm Batteries and Charger Included TD001GRDX 2.5Ah

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Fastest tightening of hardware screws in its class (as of October 2019, among domestic cordless impact drivers, according to Makita research). Strongest in its class 220N・m (as of October 2019, for domestic cordless impact drivers. According to Makita research). Battery maximum output 1,150W [BL4025 (2.5A), according to Makita standards] Reinforced tip, approximately 25% increase in anvil rigidity (compared to Makita 18V machine). New one-touch bit installed. Reduces unexpected bit loss. Reduces bit runout. Easy 6 modes (wood/texture "thick board"/texture "thin board"/bolt 1/bolt 2/bolt 3) Conforms to dust and waterproof protection class IP56 (IP designation indicates the degree of protection against dust and water intrusion into electrical equipment as stipulated by IEC international standards). Conforms to dust-proof and waterproof plastic case IP65 (excluding accessory compartment, excluding cases sold separately) (IP designation indicates the degree of protection against ingress of dust and water into electrical equipment as stipulated by IEC international standards.) Switching between 4 levels of hitting modes. Batting mode switching button (with mode memory function) Comes with 2 left and right LED lights. 36V (40Vmax), sliding Li-ion battery specification Maximum tightening torque: 220N・m. Rotation speed: Fastest 0 to 3,700/Strong 0 to 3,200/Medium 0 to 2,100/Weak 0 to 1,100 [revolutions/min]. Number of blows: Fastest 0-4,400/Strong 0-3,600/Medium 0-2,600/Weak 0-1,100 [times/min]. 1 charge work amount (estimate/when using BL4025/screw tightening): Approximately 460 wood screws φ5.4 x 90mm/approximately 150 hardware screws φ6.0 x 120mm Standard accessories: Battery BL4025 (2.5Ah), charger DC40RA (practical charge approx. 19 minutes/full charge approx. 28 minutes), case included Machine dimensions: length 120 x width 86 x height 245 mm. Mass: 1.6kg (including BL4025)