Beekeeping Frame Wire Threader and Tensioner Set for Hive Frame Assembly

Product Information:

A bee frame wire tensioner is a great way to increase the efficiency of your beekeeping. The wire tensioners work by passing wire through holes in your frame and pulling them to your desired strength.

The component consists of two elements; handles of coil and a tensioning device that work together to not only speed up the process of wire drawing but also qualitatively pulls the wire. Our tensioner is designed to fit frames of various sizes and can easily be adjusted to fit your frame.

Before work takes place, you must ensure the handle for coil and the tensioner are at least 10-15cm part and that the component is fixed to a secure surface with fixing bolts.

PRODUCTIVITY - 1 FRAME / MINUTE The device for drawing wire on bee frames. It is not only significantly speeds up the work, but also qualitatively pulls the wire. The device for easy and fast tensioning of a wire on the frames. The tensioner consists of two elements - a device for tensioning the wire and handles for the coil. Before starting work, they must be attached to the table or any stable surface with the feet and fixing bolts. The distance between the tensioner and the handle for the coil should be about 10-15 cm. On the upper part of the tensioner is placed a frame, it rests on the walls for maintenance, because for convenience the device is tilted by 45 °. The tensioner is designed for frames of different sizes. Adjust it to the size of the frame with the help of a control bolt, which is located on the right side of the device. The process of pulling the wire passes quickly and qualitatively. The wire is easily unwound from the coil and passes through the holes in the handle into which it is strung. 4 movable wheels for its maintenance on the tensioners do not allow it to get confused. And with the help of a special handle at the bottom of the device, the wire can be pulled to the strength you need. Attention! To prevent wire tie into the wood, it is necessary to use bushings.

Specification: Dimensions (DSHV) - 650 x 350 x 200 mm. Weight - Under 4 kg. Performance - 1 frame per minute. No of rows of wire - from 2 to 5.