Path Maker Mold Reusable Concrete Cement Stone Design Paver Walk Mould
Feature：
DIY plastic molded paving mold is spread in Europe and America, is a personalized brick mold
Laying out the effect posted up like of stones
So the path is more exotic, to create a style of their own garden path.
Material:PP Resin
Color:Black
Size：36×36cm
How to use this Concrete Paver Mold to build the s:
Step 1:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2:
the paver mold, scooping the concrete in with a shovel and making sure to each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, ing in any gaps or low points. Tap the mold with your hand to any bubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving .
Step 6:
After letting the concrete overnight, the cracks with dirt and wash away any excess. Wet the ground around the newly pavers to help them settle
Package Included:
1 x Concrete Slabs Path Walk Maker Mould
Label: Yes
