Customize 24V Truck LED Side Marker Lamps with Crystal Cut 16 Plated Universal Set of 8-Sided Design, LEDs, Ring, Fit, 6, Blue/Yellow/Red/White

Customize 24V only 16 LED 8-sided crystal cut truck side marker truck marker Size: Width: approx. 90mm / Height: approx. 79mm Number of LED elements: 16 LEDs Compatible voltage: 24V Current: 0.4A (1 unit) Power consumption: 10W (1 unit) Brightness: 270lm *Regarding waterproofing. In rare cases, the angle at which the lock screw is screwed in may cause the plated ring to shift slightly at an angle, which may affect the waterproofing of the rubber ring. In this case, remove the lock screw and remove the plated ring, then tighten it again, making sure that the plated ring is not tilted. In rare cases, the plated ring may shift at an angle when the lock screw is screwed in. In this case, please tighten the plated ring firmly and do not use the lock screw. Customize 24V Truck LED Side Marker Lamps with 8-Sided Crystal Cutouts, 16 LEDs, Universal Fit, Set of 6, Available in Blue, Yellow, Red, White, Green, Amber, Pink, Ice Blue, and Purple Set contents: Marker lamp x 6 (set of 6) Number of LED elements: 16 LEDs ・Applicable voltage: 24V ・Current: 0.4A (1 piece) ・Power consumption: 10W (1 piece) Brightness: 270lm ・Size: Width: approx. 90mm / Height: approx. 79mm Eye-catching side markers with colored crystal-like lenses Uses 24V LED! Low power consumption and bright! The sparkling marker body is made possible by our original eight-sided crystal cut design. Made using only high-quality PP material, the transparency is clearly visible compared to cheaper markers! The frame of the marker is made of high-quality chrome plated material for a bold shine. The reflectors are also given a mirror-like finish to enhance the shine from the mold-making stage onwards. Our original 8-facet cut tinted lenses give you vivid colors and a fantastic shine! Eye-catching side markers with colorful crystal-like lenses. Crystal-like lenses enhance the design! High-brightness SMDs are used in the light-emitting part to ensure sufficient brightness. A ballast resistor is firmly built in to ensure constant voltage and prevent the LED from burning out, protecting the LED's lifespan. Cheap marker lamps do not have adequately built-in ballasts, so they are unable to adequately control the voltage, and although they will light up, the LED's lifespan will be very short.