VOX VALVENERGY Vacuum Tube Amplifier Pedal Effector COPPERHEAD DRIVE Strobe Pedal Tuner Set - (VE-CD) + VXT-1

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. A powerful stack amp sound often used in hard rock from the 1980s onwards. VALVENERGY series COPPERHEAD DRIVE is now available! COPPERHEAD DRIVE is a pedal that gives you the sound of the powerful stack amps often used in the hard rock genre from the 80's onwards. •Equipped with Nutube. Get vacuum tube sound and response •Circuit design that maximizes potential •3 connection modes that can be switched depending on the purpose •Equipped with channel switch function •OLED display for visual confirmation of sound Since its announcement in 2015, the new Nutube vacuum tube has been featured in various media and events, and has attracted attention from engineers and manufacturers around the world. The VALVENERGY series is equipped with the innovative Nutube, which was jointly developed by Korg and Noritake Ise Electronics. The VALVENERGY series also has the same characteristics of tube amps, such as the response, rich overtones, and sound pressure. Switch the mode depending on the purpose of using the pedal. ■STANDARD： Connect to the input jack of your guitar amp like a standard pedal. ■PREAMP: Outputs preamp signal. Connect to the amplifier return terminal or power amplifier input. ■CAB-SIM: Equipped with a uniquely designed cabinet simulator. Connect to your mixer or DAW. By connecting the LINK terminals on each pedal with a commercially available mini phone cable, turning one on will bypass the other, allowing you to use it like switching channels on a guitar amp. You can also link three devices using a Y-shaped mini phone cable. ■Connection terminal: INPUT terminal, OUTPUT terminal, DC9V terminal, LINK terminal ■Control: GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch ■Power supply: 9V alkaline battery (6F22/6LR61) x 1 or AC adapter KA181 (sold separately) ■Battery life: Approximately 2 hours or more (when using alkaline batteries. Varies depending on usage conditions) ■External dimensions (W x D x H): 72 mm x 120 mm x 55 mm (including protrusions) ■ Mass: 350 g (including battery) ■Accessories: Dry battery for operation check *This device consumes a large amount of current, so we recommend using an AC adapter. *If using batteries, please use alkaline batteries.