【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
✅ [Selectable XLR cable] The cable is made by Mogami, which has a horizontally wound shielded structure with little coloring and simple high resolution specifications. It uses Neutrik connectors and is a product that is soldered and assembled by a reliable domestic specialty store.
✅ [The Cloudlifter series has sold over 300,000 units worldwide] Loved by YouTubers and podcasters, as well as musicians, PAs, and recording engineers, it is used for a variety of purposes, from world-class concert halls to radio production.
✅ [Product Overview of the Cloudlifter Series] Cloudlifter is an in-line microphone preamp that operates on phantom power. Its unique system significantly boosts the microphone gain while keeping the sound clear and without unnecessary coloration, allowing you to maximize the microphone's original characteristics.
✅ [Features] - Can be used with low-output passive microphones such as dynamic and ribbon microphones - Amplifies output passive microphone signals up to 25dB using phantom power - Durable and portable for use in studios, stages, broadcast stations, etc. - Remarkably clean and amplified audio signal - Ideal for recording directly into a DAW using a low-output dynamic microphone. - No phantom power is applied to the microphone side, protecting delicate ribbon microphones from damage.
✅ [Easy, just connect!] It's very easy to use. Just connect an XLR cable between your audio interface and the microphone, and finally turn on the phantom power switch on the audio interface. This alone will greatly increase the volume of your passive microphone, which was previously quiet. ※※※Please note※※※This unit requires phantom power.
✅ [Up to 25dB amplification while remaining clear] Adds up to 25dB of gain to passive microphones with low output such as dynamic microphones and ribbon microphones. By amplifying the microphone signal before inputting it to the preamplifier while keeping it clear, the original performance of the microphone is maximized.
✅ [Useful in situations where noise is a problem] It is useful in situations where noise is a problem when using a passive microphone, such as when the output level of the microphone used is low, the noise of the preamp used is high, or as a countermeasure against noise picked up by a long cable, on live stages and recording sites. In addition, since the microphone signal can be boosted immediately after the sound source, it has the effect of suppressing noise, and is also effective for XLR lines of acoustic guitars.
✅ [High-quality preamplifier] The Cloudlifter CL-1 is the standard model in the Cloudlifter series released by Cloud Microphones, which is a highly popular microphone booster. It is an in-line microphone preamplifier that uses phantom power (48v) to convert the audio signal into an ultra-clean gain of up to +25dB.
✅ [MADE IN USA] Award-winning ribbon microphones and Cloudlifter series from Cloud Microphones
✅ [Cloud Microphones, which first exhibited at the AES show held in New York in 2009, is an American manufacturer that has revived the ribbon microphone, which was said to be a masterpiece of RCA in the 1930s, with its own technology.] Cloud Microphones products overcome the weaknesses of traditional ribbon microphones, which have low output, while achieving the natural and rich characteristics of the RCA style itself, thanks to the latest patented gain circuit. The Cloudlifter series was released as a device that extracts the technology of the patented gain circuit and amplifies the microphone signal. The Cloudlifter series has been produced in Arizona, USA, without any changes since its release.
