0.96 6Pin OLED
1.Color:Blue / yellow and blue / white
2.Driving Chip:SSD1306
3.Pin Definition:
1)GND:power ground
2)VCC:power positive (2.8-5.5V)
3)D0:clock wire
4)D1:data wire
5)RES:reset wire
6)DC:data/command
4.Interface Type:SPI,IIC
0.96 4Pin OLED
128*64 LED display module for Arduino, supports many control chip.
Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC ,SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ° ~ 70 °
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
0.91 4Pin OLED
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
IIC interface
Display Color: White / Blue
Pin Description:
GND: Power Ground
VCC: Power + (DC 3.3 ~5v)
SCL: Clock Line
SDA: Data Line
Package Included
1 Pcs OLED Display Module
