Panasonic Drill Driver with Charging Vibration Function Body Only Sold Dual Smart BL Tap Mode Black (Battery Pack/Charger/Case Separately) (14.4V/18V)

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Chuck: Keyless chuck (Φ1.5~Φ13mm), fixed cam type vibration mechanism Maximum tightening torque: Rigid body tightening torque 《18V》Low speed 50N・m《14.4V》Low speed 40N・m, Elastic body tightening torque 《18V》High speed 12N・m, Low speed 32N・m《14.4V》High speed 10N・m, low speed 28N・m Rotation speed《:18V》High speed 70~1,800 rpm, low speed 20~530 rpm《14.4V》High speed 70~1,450 rpm, low speed 20 ~430 rotations/min, number of blows (high speed) 3,600~25,200 rotations/min (low speed) 1,260~7,200 rotations/min, impact force: approx. 2kN・m Clutch operating torque: 18 steps switching (approximately 0.5 to 4.4N・m in approximately 0.23N・m increments) Number of blows《:18V》High speed 1,260~32,300 times/min, low speed 400~9,500 times/min《14.4V》High speed 1,260~26,000 times/min, low speed 380~7,700 times/min, impact force: Approximately 2kN・m Capacity (Estimated/Full Charge): [Drilling/18V5.0Ah]《HIGH Mode》Hole Saw SPC (Φ21 x 1.6mm) = Approx. 45 holes, Woodworking / Rice Pine (Φ15 × 120mm) = Approx. 240 holes, Woodworking / Rice Pine (Φ21) ×120mm)=approx. 150 holes Capacity (estimated/fully charged): Wooding core drill (Φ65 x ceramic siding 16 mm + plywood 12 mm) = approximately 45 holes, mortar (Φ6.5 mm x depth 30 mm) = Approx. 180 holes [Drilling/18V3.0Ah]《HIGH mode》Hole saw SPC (Φ21 x 1.6mm) = Approx. 25 holes, Woodworking/Yone pine (Φ15 x 120mm) = Approx. 140 holes Capacity (estimated/fully charged): Woodworking/Japanese pine (Φ21 x 120mm) = Approx. 90 holes, Wooding core drill (Φ65 x Ceramic siding 16mm + Plywood 12mm) = Approx. 3 0 holes, mortar (Φ6.5mm x depth 30mm) = approx. 100 holes [Drilling/14.4V5.0Ah]《HIGH mode》Hole saw SPC (Φ21 x 1.6mm) = approx. 35 holes Capacity (estimated/fully charged): Woodworking/Japanese pine (Φ15 x 120mm) = Approx. 160 holes, Woodworking/Japanese pine (Φ21 x 120mm) = Approx. 100 holes, Mortar (Φ6.5mm x Depth 30mm) = Approx. 110 holes Capacity (approximately when fully charged): [Screw tightening/18V5.0Ah]《HIGH mode》Wood screws/Japanese pine Φ4.1 x 25mm = approx. 1,550 pieces, Coach screws/Japanese pine M6 x 80mm = approx. 300 pieces, [Screw tightening/ 18V3.0Ah】《H IGH mode》Wood screws/Japanese pine Φ4.1 x 25mm = approx. 950 pieces, coach screws/Japanese pine M6 x 80mm = approx. 180 pieces, [Screw tightening/14.4V5.0Ah]《HIGH mode》Wood screws/Japanese pine Φ4.1 x 25mm = Approximately 1,600 pieces