Product introduction:
100% brand new and high quality
Typical cured properties:
Tensile shear strength (GB 7124-86) overlapped area of 25 * 5 = 125mm2: PS / PS ,4-5MPa destroy both PS 30 Celsius
Use these steps:
1 Depending on the material surface treatment , surface dry and clean , no weak boundary layer ;
2 interface adhesive bonding material on the need for continuous coating, be careful not to disperse ;
3 light positioning the glue into the short ultraviolet curing lamp radiation, until the hand nudging fixed;
4 to remove the excess glue with a knife to scrape the glue overflow , or a soft cloth , paper towel and gently erase the excess glue can also be dipped in acetone, alcohol wipe ;
5 full cure time high radiation , until fully cured , note the temperature is not too high ;
6 dipped in acetone, alcohol, cleaning materials with a soft cloth or paper towel and gently wipe the bonding good material .
Instructions for use:
1 , the adhesive surface clean, dry and free of grease , you can wipe with acetone , hair dryer .
2, the UV lamp positioned curing , the curing rate is dependent on the glue to absorb light energy from the light source associated with , the light transmittance material and other factors .
3 , the operation should not squeeze too hard to be sticky , and shall not be repeatedly moved apart adherend.
4, using the rest of the glue not fall back to the original packaging to avoid contamination.
Product specifications:
Material: Glue
Color: as the picture
Size: 10ml
Product package list: 1 Pcs Glue
Notice:
1 cm = 0.3937 inches; 1 mm = 0.03937 inches;1 inch = 25.4 mm; 1 inch = 2.54 cm.
Due to different displays and lighting effects, the actual color of the product may be slightly different from the color shown on the picture.
Since this product is purely hand-measured, please allow a measurement deviation of 1-3 cm.
Hope you can understand, thank you! The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
