Features: brand new and high quality
Made of high-quality materials,
Aluminum welding rod is pure aluminum welding wire with aluminum content greater than 99.7%. It is a welding material with a wide range of uses.
Excellent welding effect-due to the internal powder, it has sufficient and smooth welding effect. Low melting point (380°~400°), strong weldability and resistance, high thermal conductivity, high electrical conductivity and excellent processing performance.
No solder powder needed-you don't need to use other flux powders that use aluminum alloy as a flux, but use salt and alkali as a coating. Very convenient and easy to solder.
Long service life-suitable for welding or surfacing of alloys with high strength, good forgeability and resistance.
It has a wide range of uses-mainly used for argon arc welding and filling materials of pure aluminum, as well as connection with aluminum bus bars and guide rods in electrolytic aluminum plants, as well as electricity, chemicals, food, etc.
Light weight and small size-size is about 330*1.6mm, weight is about 3.5g, very easy to bend and carry.
how to use:
Step 1: Clean and polish the physical .
Step 2: Heat the of the substrate until the temperature of the welding wire reaches a working temperature of 380°C to 400°C. Therefore, the heat transfer line of the parent metal can be used to form the weld. When the temperature of the base metal is sufficiently high, flames should not be used. It flows well and penetrates into the metal capillary.
Step 3: When repairing thin aluminum, just heat the aluminum-based metal to a suitable working temperature, and then use the steel wire to friction and melt back and forth to form a weld. Only welding wire melted with a metal brush can be welded at the weld.
Step 4: Use propane gas to weld objects, use industrial gas or induction heating device to heat and weld large objects, and cool down naturally after welding.
Applications in life:
Can be used for various heat sources, such as propane, oxyacetylene, etc. Low-temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum, cast aluminum, aluminum alloy and dissimilar welding between the above metals, and even severely corroded or greasy white metals, and even aluminum alloys that cannot be repaired can also be repaired. Suitable for all-round welding by junior welding operators. Only a small heating device is required. The welding strength after welding is usually higher than the strength of the base material itself, so it can be understood as a gas welding operation.
Product parameters:
Quantity: 30PCS
Material: Aluminum
Color: silver
Melting point: 380℃~400℃
Diameter: about 1.6mm
Length: about 33 cm/1.08 feet
Recommended for welding or brazing of aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
Tip:
1. The metal must be clean.
2. The temperature of the base metal should reach 400℃, including the temperature of the base metal during welding, which should be kept at 400℃, and the temperature can be high or low.
Package list:
30 * Aluminum welding wire
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
