【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
This is a 2-lamp type LED sensor light. It has a maximum total luminous flux of 2000lm (total of 2 lights), and is designed to be very bright in daylight color.
360° detection using 3 passive infrared (PIR) sensors. There are no blind spots in the detection range. The detection range is approximately 10m in radius (maximum detection distance adjustment volume, when installed at a height of 2.5m, and the ambient temperature is 20℃).Please note that PIR detects based on the difference in temperature between the wall or road it is facing and the temperature of a moving object, so the detection range will change depending on the surrounding temperature (season, etc.).
The light section can be adjusted upwards: 87°, downwards: 44°, left and right: 70° for each two lights, and 60° for each light (divided).
Various adjustment functions by volume setting. The lighting time is approximately 10 seconds to approximately 10 minutes, and the illuminance at the start of lighting is 5lx to 200lx. The brightness (total luminous flux) is 1000lm to 2000lm (setting for each light is not possible.) The sensor detection range can be narrower than at maximum (+). This adjustment is useful when detecting unnecessary moving objects such as cars running on the road.
A variety of mode settings are possible using the rotary selector switch. In night light mode, when the illuminance reaches the start point, it will automatically turn on at a brightness of 250lm (Lo setting) or 500lm (Hi setting), and when the sensor detects a moving object, it will turn on for the set lighting time, with the brightness adjusted for the total luminous flux, and then return to the night light mode. In flash mode, the light blinks for the first 5 seconds after detection, and then lights up with the brightness adjusted for the total luminous flux. Effective in intimidating intruders.
