----------------------------------------------------------------------
【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
----------------------------------------------------------------------
[2 Hall Effect Joysticks for PS5] – Hall thumbstick replacement for DualSense PS5 controller (DS5). With an electromagnetic hall sensor inside, the control sticks are more sensitive and precise. Say goodbye to drifting as the wear of traditional carbon film resistors is eliminated. Made from durable materials with superior locking structure for smoother movement and longer lifespan.
[2x Extra Calibration PCB] – Small PCBs are designed to be stacked on the back of the main board. Movement signals are input to the high-speed MCU. Calibrated signals are output to the controller main board. Connect the controller to PC with a USB cable. You can fine-tune the center and adjust the curves via web link. Accurate centering without drift is essential for FPS aiming.
[Desoldering Tools Included] - The copper heating plate melts all the solder joints at the same time with the soldering iron. Comes with a solder wick, a hole cleaner and a simple PCB holder. The most difficult task is to remove the old problem bar, as it has 14 prongs. It may not be suitable for beginners, but we added these helpers to the kit.
[Compatibility and Precautions] – 1. Please check the picture carefully for compatible controllers. 2. The soldering iron should be 60W or above. And you need serious soldering skills and devices to solder the old stick from the PCB. 3. Please follow the steps in the installation guide of this kit seriously. It is novel and tricky.
[What's in the Box Model: HL-PS5] – 2 x Hall Joystick, 2 x Calibration PCB, 1 x Heating Plate, 1 x Solder Wire, 1 x Hall Cleaning Tube. (🔺Disassembly screwdriver tool, USB wired/wireless controller, other soldering tools and materials are required but not included.)
Model: HL-PS5
Hall Effect Joysticks Replacement for PlayStation 5 Wireless Controller
Calibration PCB with MCU for the finest Centering and Rocking Curve
A Copper Heating Plate and Solder Wick help a lot for the Desoldering
Reminders:
1. 🔺Works with DualSense PS5 controller with main board BDM-010, BDM-020, BDM-030 and BDM-040
2. 🔺Not work with DualSense Edge (DSE)
3. Not fully tested with some customized controllers based on DS5 like SCUF and other 3rd. The added back button board might be removed before settings
4. The operation takes serious soldering skill and devices. The soldering iron must be more than 60W
5. Seriously follow the steps we presented on the guide for this kit is novel and tricky
6. Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however NOT included
What's in the box:
2x Hall Joysticks
2x Calibration PCB
1x Heating Plate
1x Solder Wick
1x Hole Cleaning Tubes
