HIOKI CM3289 (clamp meter, clamp tester) AC clamp meter, AC current, AC/DC voltage, resistance, continuity, compact, made in Japan

- Thin, lightweight, and compact for easy portability - Can clamp cables with a finished outer diameter of φ33 mm or less. Slim jaws that easily fit between narrow wiring *φ130 mm or less when using CT6280 (sold separately)

- AC 1000 A range for AC current measurement

- True RMS (true root mean square) suitable for measurements in noisy environments such as around inverter devices

- Supports measurements in high temperature environments and below freezing point, operating temperature range -25℃ to 65℃ (no condensation)

- Compatible with CAT IV 300V/CAT III 600V (when measuring current) and CAT III 300V (when measuring voltage) as specified by safety standards

- Rugged design that can withstand a drop impact from 1m onto concrete (drop proof)

[Measurement items]

AC current ○, DC current ×, AC + DC current ×, AC voltage ○, DC voltage ○, AC + DC voltage ×,

AC power ×, DC power ×, Resistance ○, Temperature ×, Capacitance ×, Frequency ×, Continuity check ○, Diode check ×

- AC current (Range) 42.00 A/420.0 A/1000 A, (Accuracy specified range) 4.00 A to 1000 A, (Typical accuracy) ±1.5% rdg ±5 dgt - AC current When using CT6280 (sold separately) (Range) 420.0 A/4200 A, (Accuracy specified range) 40.0 A to 4199 A, (Typical accuracy) ±3.0% rdg ±5 dgt - AC voltage (Range) 4.200 V/42.00 V/420.0 V/600 V, (Accuracy specified range) 0.400 V to 600 V, (Typical accuracy) ±1.8% rdg ±7 dgt - DC voltage (Range) 420.0 mV/4.200 V/42.00 V/420.0 V/600 V, (Accuracy range) 40.0 mV to 600 V, (Typical accuracy) ±1.0% rdg ±3 dgt - Resistance (range) 420.0 Ω/4.200 kΩ/42.00 kΩ/420.0 kΩ/4.200 MΩ/42.00 MΩ, (Accuracy range) 40.0 Ω to 41.99 MΩ, (Typical accuracy) ±2.0% rdg ±4 dgt

[Features] AC/DC automatic discrimination (current/voltage) ×, Display of maximum/minimum/average value of measured value (effective value) ×, Display of maximum/minimum value of peak value (PEAK value) ×, Display of effective value of inrush current ×, Backlight ×, AUTO power save ○, AUTO range switching ○, Display value hold (manual) ○

[Power supply] Coin-type lithium battery (CR2032) 1 piece

[Continuous use time] Approx. 70 hours

[External dimensions and weight] Approx. 57W x 181H x 16D mm, approx. 100 g

[Accessories] L9208 test lead, 9398 carrying case, coin-type lithium battery (CR2032), instruction manual

[Options] - CT6280 AC flexible current sensor (attachment, C0205 carrying case included) - 9209 test lead holder - L4933 contact pin (can be connected to the tip of the included L9208. When installing, remove the cap before installing) - L4934 small alligator clip (can be connected to the tip of the included L9208. When installing, remove the cap before installing) - C0205 carrying case (CT6280, L9208, (Can store CM3289)

[Country of Origin] Japan [Please note] If the shipper or seller is not "Amazon.co.jp", the Japanese instruction manual may not be included.

Thin, light, and compact for easy carrying

Can clamp cables with a finished outer diameter of φ33 mm or less. Slim jaws that fit easily between narrow wiring *φ130 mm or less when using CT6280 (sold separately)

Compatible with AC current measurement, equipped with AC 1000 A range

True RMS (true root mean square) suitable for measurement in noisy environments such as around inverter-using equipment